Amplifier:

E-65 E-100 E-110MKII E-160 E-220 AV-120 AV-900

E-65 " Simple is the best " is one of the saying from many audiophiles and designers alike. Here, the E-65 stereo integrated amplifier was designed with minimalist approach in mind in a way to avoid complicated and signal coloration. The minimalist design approach is to pass on an important message to the audiophiles that, you are not buying lots of knobs and gadgets on the front panel, but for the music lovers who solely appreciates good music. Just sit back and relax and enjoying your favourite piece of music.
	The E-65 produces 65 watts per channel that our engineers determined, very suitable for average home. The driving power of the E-65 is more than adequate to drive most of the medium to high efficiency speaker system and fill up the room with music .
Power output : 2 x 65W rms / 8 Ohm Frequency response : 10Hz - 60K Hz(-1.5dB) Signal to noise ratio : > 95db Damping Factor : 33 Dimensions : 429x 109 x 316mm (W x H x D) Weight : 12Kg Go top

E-100 Built with the same design philosophy as the E-65, but we've put more current, more power into the E-100. Our engineers always consider reserve power is necessary in some situation such as to drive a more difficult load where the sensitivity is less than ideal or in a more than average size listening room.
	The E-100 as it was named, produce 100 watts per channel to cope with any circumstances mentioned above. A special feature worth mentioning that has become one of our standard design parameter, that is, like other Vegen models, feature a detachable AC power cord that provides you extra convenience to fine tune the entire system.
Power output : 2 x 100W rms / 8 Ohm Frequency response : 10Hz - 60K Hz(-1.5dB) Signal to noise ratio : > 95db Damping Factor : 33 Dimensions : 429x 109 x 316mm (W x H x D) Weight : 12Kg Go top

E-110 MKII is designed to be versatile for average home Music appreciation. It's powerful output with high current capability character is capable to drive most of the speaker systems in the market. Yet well match to Vegen's speaker systems.
	Dual mono design with 2 high power toroidal transformers. High speed and broad band topology ensures analytical reproduction and prevented from phase distortion. Balance XLR input ready eliminates interference elevates S/N ratio Hence more music detail. Slim type infrared remote control for level adjustment and source select.
Power output : 110W x 2 / 8 Ohm, 220W x 2 / 4 Ohm Frequency response : 5 Hz - 160K Hz Total harmonic distortion : << 0.015% Signal to noise ratio : >> 106db Sensitivity : 500mV Dimensions : 455 x 135 x 445mm Weight : 20Kg Go top

E-160 High power output with extra size toroidal transformer makes the E-160 all time favorite to the most demanding audiophiles because it's high current capability, theoretically capable to drive any speaker system in a moderate size listening room up to 40m>2.
	Broad band design ensures phase linearity. 600W toroidal power transformer and large size filtering caps ensure stable voltage and current supply.
Power output : 2 x 160W rms / 8Ohm Frequency response : 10Hz - 28,K Hz Signal to noise ratio : > 95db Total harmonic distortion : < 0.05% Input sensitivity : 500mv Dimensions : 455 x 175 x 455mm (W x H x D) Weight : 24Kg Go top

E-220 As E-160, E-220 also the latest development from our engineers bearing in mind to aim at the highest quality both circuit design and sound quality. The E-220 is a dual mono design stereo amplifier that is built in one chassis. The dual mono design benefits from better channel separation and over all performance such as reducing harmonic distortion and greater S/N ratio. E-220 is your final choice in integrated amplifier
	Broad band design ensures phase linearity Totally independent dual mono design improves dynamic and reduce noise floor. Extra large size toroidal transformers and filtering caps ensures stable operation of the amplifier.
Power output : 2 x 220W rms / 8 Ohm Frequency response : 10Hz - 28K Hz Signal to noise ratio : > 95db Total harmonic distortion : < 0.05% Input sensitivity : 500mv Dimensions : 455 x 175 x 455mm (W x H x D) Weight : 26Kg Go top

AV-120 From Lynx Audio, we proudly present our latest development on home theater. The AV-120 home theater amplifier by public demand, to build it on a concept of high-end audio in mind, could use it freely as a high-end audio amplifier.
	The AV-120 is a Dolly pro-logic by nature but it also AC-3 ready that you may directly hook up to a DVD player with AC-3, 5 channels decoded output. Another sonic break through is the karaoki function with 2 mic input which again of high-end quality. In other word, all that you wanted is in one roof.
Frequency response : 10Hz - 28K Hz Stereo main / Power output (RMS) : 2 x 120W rms / 8 Ohm, 2 x 240W rms / 4 Ohm Center channel / Power output (RMS) : 2 x 120 / 4 Ohm Rear channel / Power output (RMS) : 2 x 120 / 4 Ohm Signal to noise ratio : > 95db Total harmonic distortion : < 0.05% Input sensitivity : 500mv Dimensions : 455 x 100 x 365mm (W x H x D) Weight : 26Kg Go top

AV-900 Digital AV Control Center All CAD assisted design, high energy VFD display match with silver-white design yet elegant and stylishchoice.
	AV-900 Digital AV Control Center
Multi decoder, Dolby Digital (AC-3) DTS, with dual powerful intelligentprocessor as control center enchanced with DPS sound stage effect. Most advanced Central Micro Processor (CPU) to personalize every Operation which becomes a pleasure.	5-channel of 120W rms/6 Ohm pure audio output. Powerful pure analog power supply, guarantees clean power output High quality Dynamic Exciter Karaoki IC , fully brings out the vocal performance.